Support & Tutorials

Video 1 of 5

This tutorial will show you how to update your Garz & Fricke HMI by using a USB stick.

Duration: 06:43 Min.

Video 2 of 5

This tutorial will show you how to update your Garz & Fricke HMI by using a local TFTP server.

Duration: 04:55 Min.

Video 3 of 5

This tutorial will show you how to update your Garz & Fricke HMI by using our support webserver. Make sure that your device is connected to the internet.

Duration: 04:00 Min.

Video 4 of 5

This tutorial will show you how to update your Garz & Fricke HMI by using the installer tool Flash-N-Go update. Make sure that your device is connected to the internet.

Duration: 04:32 Min.

Video 5 of 5

This tutorial will show you how to update your Garz & Fricke HMI by using the installer tool Flash-N-Go update (in offline mode). No internet connection is needed here.

Duration: 05:01 Min.

This video informs you about:

• connecting the Device to Power, Serial Port and Ethernet
• installing the SDK on the Development Machine
• Setting up QtCreator to work with the SDK and the G&F HMI
• QML’s structure by way of a little Demo
• Deploying the Demo to the target and adding it to the Autostart

Duration: 24:13 Min.

Install embedded HMI form factors

How can I mount embedded HMI form factors? This video shows you at a glance our variety of form factors for the wide range of embedded HMIs Garz & Fricke offers. Our product manager René Dannehl shows you how easy they can be integrated into different housings.

Duration: 04:44 Min.

A Garz & Fricke HMI Starterkit makes your life easier when you are starting to integrate one of our products into your application.

This video demonstrates how easy the first setup of the included components as the HMI, cables, power supply, software etc. is. All interfaces are explained and the handling of the Flash & Go USB stick too.

Duration: 07:50 Min.